Smartec

 

 

The SMT172 is a three terminal integrated temperature sensor with a duty-cycle output. Two of the terminals are used for the power supply (2.7 -5.5 Volts) and the third terminal carries the output signal.
A duty cycle modulated output is used so that the output can be read by a microprocessor, while the  analogue information is still available.

The sensors are available in a number of encapsulations: TO18, TO92, TO220, SOIC-8L, SOT223, HEC and in a 7 mm ss. probe with 5 mtr cable. The SMT172 can be supplied as a naked die as well.

For quick design-in, a lot of applications are available on the web and for those who want plug and play, we have designed a Smart Temperature Acquisition System for 4 or 8 Smartec temperature sensors. It was designed to get the best possible temperature measurement results with the SMT172 temperature sensors (absolute accuracy 0.1 °C, noise <0.0001 °C), at low cost. We offer  an application to connect the board to an Excel  application. In this way, a low budget , high accuracy measurement system can be built.

The SMT172 has an overall accuracy of 0.1 °C in the range from -20 °C to +60 °C and an accuracy of 0.4 °C from -45 to +130 °C. This makes the sensor especially useful in all applications where human conditions (climate control, food processing etc.) are to be controlled.

The CMOS output of the sensor can drive cable lengths up to 20 meters. This makes the SMT172 very useful in remote sensing and control applications.

 

 

The SMT172 is a three terminal integrated temperature sensor with a duty-cycle output. Two of the terminals are used for the power supply (2.7 -5.5 Volts) and the third terminal carries the output signal.
A duty cycle modulated output is used so that the output can be read by a microprocessor, while the  analogue information is still available.

The sensors are available in a number of encapsulations: TO18, TO92, TO220, SOIC-8L, SOT223, HEC and in a 7 mm ss. probe with 5 mtr cable. The SMT172 can be supplied as a naked die as well.

For quick design-in, a lot of applications are available on the web and for those who want plug and play, we have designed a Smart Temperature Acquisition System for 4 or 8 Smartec temperature sensors. It was designed to get the best possible temperature measurement results with the SMT172 temperature sensors (absolute accuracy 0.1 °C, noise <0.0001 °C), at low cost. We offer  an application to connect the board to an Excel  application. In this way, a low budget , high accuracy measurement system can be built.

The SMT172 has an overall accuracy of 0.1 °C in the range from -20 °C to +60 °C and an accuracy of 0.4 °C from -45 to +130 °C. This makes the sensor especially useful in all applications where human conditions (climate control, food processing etc.) are to be controlled.

The CMOS output of the sensor can drive cable lengths up to 20 meters. This makes the SMT172 very useful in remote sensing and control applications.

 

Key Features

  • excellent performance:
     accuracy better than 0.1°
    resolution better than 0.0001°C
     
  • duty-cycle (PWM) output
     
  • 2.7 – 5.5 V power supply
     
  • analog voltage output with a low-pass filter
     
  • wide range of packaging possibilities

 

 

Goto notes.smartec-sensors.eu for more information about the use of our sensors.
Log In
Smartec © 2019